View this release
Alternative links
Introducing MMK 342 - Open Bolt Action - 22 LR Semi Automatic Pistol
Worked two years for this project! The aim was making a pistol for low budget, keeping as simple as possible with minimum assemble. I am looking for cooperations & partnership or business opportunity to create legalized manufacturing, this model is an example for low cost production. There is also another model, which some of the parts can be turned to the metal with same mechanism.
- This model prepared for 22 LR ammunition, tolerances has been given, but haven't tested, remains as a prototype at this moment,
! RISKS ARE YOUR OWN IF YOU'RE GOING TO TEST THIS MODEL !
- After printing all of the parts(8 parts), you need 4 spring(for trigger, trigger holder, striker, magazine) then ready to go!
- This is an open bolt action, if the magazine is loaded and striker was pulled, it will be ready to fire!
- Lower receiver, upper receiver, barrel, ejector is combined with the Frame part.
- Slider, extractor, trigger housing, firing pin is combined with the Striker part.
- This model can be converted to rifle easily.
- For frame part, 0.8 or 1 mm nozzle recommended.(with bigger nozzle, barrel can be printed without support)
- For striker part, Nylon+CF or PC filament recommended.
You can reach me via message, twitter or e-mail, Thank you!
mecitmuratkaya@gmail.com
LBRY Tags: mmk; 3d; cad; prototype; defense
Worked two years for this project! The aim was making a pistol for low budget, keeping as simple as possible with minimum assemble. I am looking for cooperations & partnership or business opportunity to create legalized manufacturing, this model is an example for low cost production. There is also another model, which some of the parts can be turned to the metal with same mechanism.
- This model prepared for 22 LR ammunition, tolerances has been given, but haven't tested, remains as a prototype at this moment,
! RISKS ARE YOUR OWN IF YOU'RE GOING TO TEST THIS MODEL !
- After printing all of the parts(8 parts), you need 4 spring(for trigger, trigger holder, striker, magazine) then ready to go!
- This is an open bolt action, if the magazine is loaded and striker was pulled, it will be ready to fire!
- Lower receiver, upper receiver, barrel, ejector is combined with the Frame part.
- Slider, extractor, trigger housing, firing pin is combined with the Striker part.
- This model can be converted to rifle easily.
- For frame part, 0.8 or 1 mm nozzle recommended.(with bigger nozzle, barrel can be printed without support)
- For striker part, Nylon+CF or PC filament recommended.
You can reach me via message, twitter or e-mail, Thank you!
mecitmuratkaya@gmail.com
LBRY Tags: mmk; 3d; cad; prototype; defense