Release image

ANDABATA Gun Camera System

Stubbs Customs 255.6KiB Oct. 29, 2022, 8:47 p.m.

Rifle AR-15

The ANDABATA is the vision system created for my KAC ChainSAW inspired AR15 conversion kit. This kit allows the end user to place an analog FPV camera on the platform , and view it remotely from the BPNVG or the dedicated receiver.

The ANDABATA housing is two parts, and contains the following:

-A Runcam Night Eagle 3. A regular Eagle 3 can be used and the end user can also remove the IR filter from a standard Eagle 3.
-A 9v battery and 9v battery connector harness.
-A waterproof toggle switch.
-A wire for transferring the signal to the receiver. I used a 12v power plug so that if the unit is pulled or I forget to unplug the unit and set the platform down the cord can pull free of the connector instead of damaging the unit.

4x 40mm to 45mm long M5 bolts or similar, and nuts are the hardware sandwiching the two halves together and retaining the picatinny mount, and one 45mm long m5 bolt and nut are needed for the picatinny crossbolt. The unit can be raised with spacers and the four bolts will need to be lengthened an equal amount.

There is a top cover version with and without a logo. The Andabata is a punitive class of gladiator who were equipped with a helmet without eye holes. This is referential to the otherwise useless nature of the ChainSAW platform without it, and that it replaces the end users vision.

This is the toggle switch used but any similar switch will work.

https://www.ebay.com/itm/224944841302?hash=item345fc1e256:g:08kAAOSwN~diXdHD&amdata=enc%3AAQAHAAAA4Ip3ZWSGrfls0q%2B89yEtfUab3mVukDGgCw4cXAPBT9i8ypCV4UcMAX49Vdg48oswvjBnzDrYBEZXzw5ZJiBwEjHbFsYdd0HyU9DE7iEXheueniCN1Gxgldt05VhHQJNZOOV3AReCiLvHhjEiSibPunwiCqA30Wezv%2F1aG96lzOeF9xi6XqZqQmAg4sI4v1TiV96Aqda7aNNMvoHCFiFkbDphhblkMmtC1AlKSt4xLJitb2NxbES%2Bz6ibsPQvrBu%2B4D1DxO7TgDi7fomBUOr8Qs3etfzVj51tdpDzFDyAWS6D%7Ctkp%3ABk9SR_CL_OiEYQ

LBRY Tags: andabata; chainsaw; kac; ar15; handbrake