View this release
Alternative links
+2 Dmg Glock Mag Extension (Dot Matrix Update): FFFTech/FFFTechnology
Oh lookie here boyos, ye found a weapon mod that adds +2 dmg spec to yer lead launcher.
No doubt this'll help when we raid the Level 9 Dungeon full'a Orcs...
Oh wait, this aint a role playing game...
This is a +2 mag extension for Glock double stack 9x19 NATO caliber mags. The design
features ridging that wraps around the front and sides of the extension to aid in
mag retention within one's grasp when unloading/reloading the pistol. The sides of
extension are thickened for greater durability if/when the mag is dropped onto a
hard surface.
Compatible with Gen 3-4 Glock magazines.
V1.5 Update: Dot Matrix Baseplate Added
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 204C
Bed: 54C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 6
Infill: 36%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 25%
Support X/Y Offset: .34mm
(Block supports for the dot matrix in Cura)
Hardware Needed:
1x Compatible OEM Mag Body (Such as: Gen 3 G17 mag, or a Gen 4 G19 mag)
1x Standard Length Mag Spring
1x Standard OEM Floorplate (For compressing the mag spring when assembling/disassembling)
LBRY Tags: 3d printing; extension; firearms; glock; magazine
Oh lookie here boyos, ye found a weapon mod that adds +2 dmg spec to yer lead launcher.
No doubt this'll help when we raid the Level 9 Dungeon full'a Orcs...
Oh wait, this aint a role playing game...
This is a +2 mag extension for Glock double stack 9x19 NATO caliber mags. The design
features ridging that wraps around the front and sides of the extension to aid in
mag retention within one's grasp when unloading/reloading the pistol. The sides of
extension are thickened for greater durability if/when the mag is dropped onto a
hard surface.
Compatible with Gen 3-4 Glock magazines.
V1.5 Update: Dot Matrix Baseplate Added
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 204C
Bed: 54C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 6
Infill: 36%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 25%
Support X/Y Offset: .34mm
(Block supports for the dot matrix in Cura)
Hardware Needed:
1x Compatible OEM Mag Body (Such as: Gen 3 G17 mag, or a Gen 4 G19 mag)
1x Standard Length Mag Spring
1x Standard OEM Floorplate (For compressing the mag spring when assembling/disassembling)
LBRY Tags: 3d printing; extension; firearms; glock; magazine