View this release
Alternative links
Vertical P-Mag/Hochul Mag Coupler by Qwerm
A series of vertical mag couplers designed for P-Mag's and 3D printed Hochul magazines. Designed for use in states that limit you to 10 round magazines. Couple two 10 round magazines to have a quick reloading set-up in the size of a 30 round magazine.
Orientation: Print with the hole facing down. Make sure you have good bed adhesion. Include a support blocker covering the top half of the print.
Settings Used:
Material: PLA+
Extruder Temp: 60c
Bed Temp: 210c
Layer Height: 0.20mm
Wall Line Count: 5
Infill Percentage: 50-100%
Support: Yes
Support Structure: Tree
Support Placement: Touching Buildplate
Fuzzy Skin: Disabled
Credit to Remnants for the Hochul Mag.
LBRY Tags: ar15; pmag; hochul mag; magazine; 3d printed
A series of vertical mag couplers designed for P-Mag's and 3D printed Hochul magazines. Designed for use in states that limit you to 10 round magazines. Couple two 10 round magazines to have a quick reloading set-up in the size of a 30 round magazine.
Orientation: Print with the hole facing down. Make sure you have good bed adhesion. Include a support blocker covering the top half of the print.
Settings Used:
Material: PLA+
Extruder Temp: 60c
Bed Temp: 210c
Layer Height: 0.20mm
Wall Line Count: 5
Infill Percentage: 50-100%
Support: Yes
Support Structure: Tree
Support Placement: Touching Buildplate
Fuzzy Skin: Disabled
Credit to Remnants for the Hochul Mag.
LBRY Tags: ar15; pmag; hochul mag; magazine; 3d printed