View this release
Alternative links
LR300 Pistol Grip V1.1 by Qwerm
My attempt to make a replica of the classic LR-300 pistol grip. I tried my best to make it as accurate I can (even including the features which don't make sense to me.) using the small amount of quality reference images I was able find. Good hunting, stalker.
Changelog:
V1.1 - Fixed selector spring hole depth.
For those who already printed the initial release and don't want to re-print it, I included a small plug you can drop into the old model to take up the extra space for the selector spring.
Orientation: Print standing up.
Settings Used:
Material: PLA+
Extruder Temp: 210c
Bed Temp: 60c
Layer Height: 0.20mm
Wall Line Count: 4-5
Infill Percentage: 50-100%
Support: Yes
Support Placement: Touching Buildplate
Fuzzy Skin: Disabled
Thanks to Stubbs for the inspiration. If you like the LR-300 check out his LR-300 project.
LBRY Tags: 3d printed; ar15; lr300; pistol grip; lr-300
My attempt to make a replica of the classic LR-300 pistol grip. I tried my best to make it as accurate I can (even including the features which don't make sense to me.) using the small amount of quality reference images I was able find. Good hunting, stalker.
Changelog:
V1.1 - Fixed selector spring hole depth.
For those who already printed the initial release and don't want to re-print it, I included a small plug you can drop into the old model to take up the extra space for the selector spring.
Orientation: Print standing up.
Settings Used:
Material: PLA+
Extruder Temp: 210c
Bed Temp: 60c
Layer Height: 0.20mm
Wall Line Count: 4-5
Infill Percentage: 50-100%
Support: Yes
Support Placement: Touching Buildplate
Fuzzy Skin: Disabled
Thanks to Stubbs for the inspiration. If you like the LR-300 check out his LR-300 project.
LBRY Tags: 3d printed; ar15; lr300; pistol grip; lr-300