View this release
Alternative links
3D Printable Receiver for the Winchester 190 tube fed semi-auto .22 S-L-LR
PLA +, PRO, Tough, or better
8 walls
100% Rectilinear Infill
Play around with print bed orientation, I use tree supports
HARDWARE PARTS NEEDED:
One 1/2 inch nut 5/16-24 fine thread
The WinOne90 receiver has been tested with the following .22 S/L/LR rimfire semi-auto parts kits:
Winchester Model 190 .22 rimfire Semi-auto Rifle
Winchester Model 290 .22 rimfire Semi-auto Rifle
Sears 3T .22 rimfire Semi-auto Rifle
Ted Williams 3T .22 rimfire Semi-auto Rifle
Ted Williams 37 .22 rimfire Semi-auto Rifle
All "Deluxe" variants of these models will work also
Over 2.1 million were produced from the mid 1960s and ended in the late 1970s
Parts kits can be found at GunBroker and EveryGunPart
Parts kits will run between $60 to $200
Additional Resources:
https://jackfirstinc.com/product-category/winchester/winchester-rifles/winchester-150-190-250-255-270-275-290-22-rimfire-rifles/
OTHER MODELS IN THE FAMILY THAT MAY SHARE PARTS
The WinOne90 receiver will not work with lever or slide action parts kits at this time (2024-11-24)
Winchester Model 150 .22 rimfire lever action
Winchester Model 250 .22 rimfire lever action
Winchester Model 255 .22 WinMag rimfire lever action
Winchester Model 270 .22 rimfire slide action (pump)
Winchester Model 275 .22 WinMag rimfire slide action (pump)
LBRY Tags: fosscad; 3d2a; 2a3d; winchester; winone90
PLA +, PRO, Tough, or better
8 walls
100% Rectilinear Infill
Play around with print bed orientation, I use tree supports
HARDWARE PARTS NEEDED:
One 1/2 inch nut 5/16-24 fine thread
The WinOne90 receiver has been tested with the following .22 S/L/LR rimfire semi-auto parts kits:
Winchester Model 190 .22 rimfire Semi-auto Rifle
Winchester Model 290 .22 rimfire Semi-auto Rifle
Sears 3T .22 rimfire Semi-auto Rifle
Ted Williams 3T .22 rimfire Semi-auto Rifle
Ted Williams 37 .22 rimfire Semi-auto Rifle
All "Deluxe" variants of these models will work also
Over 2.1 million were produced from the mid 1960s and ended in the late 1970s
Parts kits can be found at GunBroker and EveryGunPart
Parts kits will run between $60 to $200
Additional Resources:
https://jackfirstinc.com/product-category/winchester/winchester-rifles/winchester-150-190-250-255-270-275-290-22-rimfire-rifles/
OTHER MODELS IN THE FAMILY THAT MAY SHARE PARTS
The WinOne90 receiver will not work with lever or slide action parts kits at this time (2024-11-24)
Winchester Model 150 .22 rimfire lever action
Winchester Model 250 .22 rimfire lever action
Winchester Model 255 .22 WinMag rimfire lever action
Winchester Model 270 .22 rimfire slide action (pump)
Winchester Model 275 .22 WinMag rimfire slide action (pump)
LBRY Tags: fosscad; 3d2a; 2a3d; winchester; winone90