View this release
Alternative links
Laffs J Frame Speed Loader V2.0.1: Laffs Dynamics
Version 2 of the original Laffs Dynamics J Frame Speed Loader; designed specifically for 5rd, .38Spl/.357Mag revolvers.
New Features Include:
*Reduced cartridge release knob turn of 30 deg, instead of 35deg.
*New cartridge retention spindle that now interlocks with the release knob.
*Longer cartridge holder, spindle, and release knobs for better control when feeding into a revolver
cylinder.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 32%
Support Material Percentage: 22%
Support material only needed for the detent channel at the bottom of the cartridge holder, and under the mechanically
compliant spring/catch on the release knob.
Hardware Required:
1x M3x12mm Hex Screw
LBRY Tags: 3d printing; firearms; speed loader; j frame; ammo
Version 2 of the original Laffs Dynamics J Frame Speed Loader; designed specifically for 5rd, .38Spl/.357Mag revolvers.
New Features Include:
*Reduced cartridge release knob turn of 30 deg, instead of 35deg.
*New cartridge retention spindle that now interlocks with the release knob.
*Longer cartridge holder, spindle, and release knobs for better control when feeding into a revolver
cylinder.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 32%
Support Material Percentage: 22%
Support material only needed for the detent channel at the bottom of the cartridge holder, and under the mechanically
compliant spring/catch on the release knob.
Hardware Required:
1x M3x12mm Hex Screw
LBRY Tags: 3d printing; firearms; speed loader; j frame; ammo