View this release
Alternative links
This is a plate that can be added to an x95 oem plate that has been trimmed. You will need to cut the rubber off and shave off the oem plastic to leave, no more than, .08" thickness. The pad presses into the OEM holes. Heat can be applies to the inside pins to rivet them into place. Adhesive is optional to help hold the ends closed better.
Print with the supports to the back side. The more supports the better the print but the harder to remove. I used 80% and printed with ABS.
Print with the supports to the back side. The more supports the better the print but the harder to remove. I used 80% and printed with ABS.