
View this release
Alternative links
FBS-1 (Yugo M70): Laffs
Clubfoot styled straight buttstock for Yugoslav/Serbian fixed stock type M70s. Has two sling loops.
Two variants are available:
*Standard
*QD (Quick detach sling sockets on each side of the stock, as well as a central socket on the bottom)
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 7+
Infill: 50%+
Support Material Percentage: 18%
Hardware Needed:
1x M8x30 Bolt, 1mm fine thread pitch (NOT 1.25mm)
1x M8 Washer, 15mm OD (Optional)
2x M4x12mm Screws
LBRY Tags: 3d printing; firearms; c:disable-slimes-comments; c:disable-slimes-video; c:disable-reactions-comments; c:disable-reactions-video; yugo; m70; stock
Clubfoot styled straight buttstock for Yugoslav/Serbian fixed stock type M70s. Has two sling loops.
Two variants are available:
*Standard
*QD (Quick detach sling sockets on each side of the stock, as well as a central socket on the bottom)
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 7+
Infill: 50%+
Support Material Percentage: 18%
Hardware Needed:
1x M8x30 Bolt, 1mm fine thread pitch (NOT 1.25mm)
1x M8 Washer, 15mm OD (Optional)
2x M4x12mm Screws
LBRY Tags: 3d printing; firearms; c:disable-slimes-comments; c:disable-slimes-video; c:disable-reactions-comments; c:disable-reactions-video; yugo; m70; stock