View this release
Alternative links
HG-2 (Partisan-9): Laffs Dynamics
Handguard for the Partisan-9. Has 24 vents for cooling during extended firing strings. Overlaps the Partisan-9 integrated suppressor 4 outer screws to
allow for the handguard to extend to roughly half the suppressor's length.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 7+
Infill: 70%+
Support Material Percentage: 20%
Print the handguard on it front face.
Notes:
1) This data pack is just for printing the handguard. To get the base firearm data pack, use the following link:
(https://odysee.com/@TheGatalog-HybridDesigns:0/Partisan-9_Release-v1.0:7)
LBRY Tags: 3d printing; firearms; partisan-9; pcc; handguard
Handguard for the Partisan-9. Has 24 vents for cooling during extended firing strings. Overlaps the Partisan-9 integrated suppressor 4 outer screws to
allow for the handguard to extend to roughly half the suppressor's length.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 7+
Infill: 70%+
Support Material Percentage: 20%
Print the handguard on it front face.
Notes:
1) This data pack is just for printing the handguard. To get the base firearm data pack, use the following link:
(https://odysee.com/@TheGatalog-HybridDesigns:0/Partisan-9_Release-v1.0:7)
LBRY Tags: 3d printing; firearms; partisan-9; pcc; handguard