View this release
Alternative links
Evo Curved Waffle Mag (20): Laffs Dynamics
A classic, curved geometry variant of the Smol Waffle Stick Mag (See Notes) for the CZ Scorpion Evo 3.
For people that love the waffle mag texture, but wanted a normal 9mm curved mag feel.
Uses the exact same internals as the following magazine designs:
*BEEG Waffle Stick Mag
*GoldCorp Evo Mag 30
*Scaffold Stick Mag
*Smol Waffle Stick Mag
The magazine is compatible with mag springs from:
*Sig Sauer P320 17rd mags
*OEM CZ Scorpion Evo 3 20rd mags
*Aftermarket CZ Scorpion Evo 3 springs (See Notes)
*Beretta 92 Series 15rd mags
*Magpul PMAG GL9 15rd mags
*Magpul PMAG GL9 17rd mags
*Magpul PMAG GL9 21rd mags
*Magpul PMAG GL9 27rd mags (Damn that was surprising)
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 8+
Infill: 75%+
Support Material Percentage: 20%
Notes:
1) Aftermarket mag springs can be purchased from: https://czcustom.com/cz-parts-all/cz-springs-all/evo-mag-ext-spring.html
2) The straight Smol Waffle Stick Mag can be found here: https://defcad.com/library/bc5aa068-0cd3-42ee-83d6-cf190bef75ed/
Hardware Needed:
1x 20rd Scorpion Evo Mag Spring
LBRY Tags: 3d printing; firearms; cz; evo; waffle
A classic, curved geometry variant of the Smol Waffle Stick Mag (See Notes) for the CZ Scorpion Evo 3.
For people that love the waffle mag texture, but wanted a normal 9mm curved mag feel.
Uses the exact same internals as the following magazine designs:
*BEEG Waffle Stick Mag
*GoldCorp Evo Mag 30
*Scaffold Stick Mag
*Smol Waffle Stick Mag
The magazine is compatible with mag springs from:
*Sig Sauer P320 17rd mags
*OEM CZ Scorpion Evo 3 20rd mags
*Aftermarket CZ Scorpion Evo 3 springs (See Notes)
*Beretta 92 Series 15rd mags
*Magpul PMAG GL9 15rd mags
*Magpul PMAG GL9 17rd mags
*Magpul PMAG GL9 21rd mags
*Magpul PMAG GL9 27rd mags (Damn that was surprising)
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 8+
Infill: 75%+
Support Material Percentage: 20%
Notes:
1) Aftermarket mag springs can be purchased from: https://czcustom.com/cz-parts-all/cz-springs-all/evo-mag-ext-spring.html
2) The straight Smol Waffle Stick Mag can be found here: https://defcad.com/library/bc5aa068-0cd3-42ee-83d6-cf190bef75ed/
Hardware Needed:
1x 20rd Scorpion Evo Mag Spring
LBRY Tags: 3d printing; firearms; cz; evo; waffle