View this release
Alternative links
v1.25
DB9 BASED WITH LAST ROUND BOLT HOLD OPEN ON GLOCK MAGS AND SS COMPATABLE
upper receiver modification needed to fit the ss lever I just cut the back of mine completely out in hopes that it would be fine and it has been fine so far
HARWARE NEEDS TO BE AJUSTED TO EASIER TO FIND THINGS
originally made for micmaster-carr hardware but its just too expensive
designed for use with the aves rails upper
only takes a2 stile handgrips no back straps
I made a 3d printed knob because the one that come with mine snapped in two while shooting
printed Hoffman Tactical rounded detent
takes Hoffman Tactical ss cam
the upper model is from the dp9 release and it says it was modeled by DanishBulldog
the original model I started with was from db-firearms
https://odysee.com/@db-firearms:4/DB-Alloy-Official-Release-1.0:4
I was inspired by Philz Phree Phyrearms Phoundation for how the front mounts up and how the last round bolt hold open works
https://odysee.com/@philphisher:0/macaroon:3
I was inspired by 009515 for the sled idea to get the ss working
https://odysee.com/@009515:7/SS-DB9-SLIP-TRIP-AVES-JCA-UPPER:7
polymaker PolyLite™ PLA Pro for the lower
polymaker PolyMax™ PLA for the front and rear parts
polymaker PolyFlex™ TPU90 for the buffer (the buffer that comes with the aves kit works fine but comes apart after about 1200 rounds in my experience and conditions)
I printed with a .6mm nozzle but a .4 should work just fine
.2 layer high 100% infill 6 perimeters max temp for filament
glock mag catch spring
ar trigger group
reduced weight bolt hold open spring
5/16" Diameter, 1-1/2" Usable Length x1
Carbon Steel Clevis Pin
98306A632
5/16" Diameter, 1-3/4" Usable Length x1
Carbon Steel Clevis Pin
98306A633
Dowel Pin,
1/8" Diameter, 1-1/2" Long x1
98381A478
Number 6 Size, 3/4" Long x7
Flat Head Thread-Forming Screws
for Brittle Plastic 410 Stainless Steel
96068A159
M4 x 0.7mm Thread, 45mm Long x6
Socket Head Screw
91290A145
M4 x 0.7 mm Thread, 5 mm High x10
Medium-Strength Steel Nylon-Insert Locknut
90576A103
M4 x 0.7 mm Thread, 25 mm Long x2
Socket Head Screw
91274A122
M5 x 0.8 mm Thread, 5 mm High x2
Class 8, Zinc Plated
90576A104
M5 x 0.8 mm Thread, 25 mm Long x2
Zinc-Plated Alloy Steel Socket Head Screw
90128A249
M4 x 0.70 mm Thread, 40 mm Long x2
Button Head Hex Drive Screw
91239A160
Number 6 Size, 1" Long x1 for optional printed charging handle
Rounded Head Thread-Forming Screws
97975A125
DB9 BASED WITH LAST ROUND BOLT HOLD OPEN ON GLOCK MAGS AND SS COMPATABLE
upper receiver modification needed to fit the ss lever I just cut the back of mine completely out in hopes that it would be fine and it has been fine so far
HARWARE NEEDS TO BE AJUSTED TO EASIER TO FIND THINGS
originally made for micmaster-carr hardware but its just too expensive
designed for use with the aves rails upper
only takes a2 stile handgrips no back straps
I made a 3d printed knob because the one that come with mine snapped in two while shooting
printed Hoffman Tactical rounded detent
takes Hoffman Tactical ss cam
the upper model is from the dp9 release and it says it was modeled by DanishBulldog
the original model I started with was from db-firearms
https://odysee.com/@db-firearms:4/DB-Alloy-Official-Release-1.0:4
I was inspired by Philz Phree Phyrearms Phoundation for how the front mounts up and how the last round bolt hold open works
https://odysee.com/@philphisher:0/macaroon:3
I was inspired by 009515 for the sled idea to get the ss working
https://odysee.com/@009515:7/SS-DB9-SLIP-TRIP-AVES-JCA-UPPER:7
polymaker PolyLite™ PLA Pro for the lower
polymaker PolyMax™ PLA for the front and rear parts
polymaker PolyFlex™ TPU90 for the buffer (the buffer that comes with the aves kit works fine but comes apart after about 1200 rounds in my experience and conditions)
I printed with a .6mm nozzle but a .4 should work just fine
.2 layer high 100% infill 6 perimeters max temp for filament
glock mag catch spring
ar trigger group
reduced weight bolt hold open spring
5/16" Diameter, 1-1/2" Usable Length x1
Carbon Steel Clevis Pin
98306A632
5/16" Diameter, 1-3/4" Usable Length x1
Carbon Steel Clevis Pin
98306A633
Dowel Pin,
1/8" Diameter, 1-1/2" Long x1
98381A478
Number 6 Size, 3/4" Long x7
Flat Head Thread-Forming Screws
for Brittle Plastic 410 Stainless Steel
96068A159
M4 x 0.7mm Thread, 45mm Long x6
Socket Head Screw
91290A145
M4 x 0.7 mm Thread, 5 mm High x10
Medium-Strength Steel Nylon-Insert Locknut
90576A103
M4 x 0.7 mm Thread, 25 mm Long x2
Socket Head Screw
91274A122
M5 x 0.8 mm Thread, 5 mm High x2
Class 8, Zinc Plated
90576A104
M5 x 0.8 mm Thread, 25 mm Long x2
Zinc-Plated Alloy Steel Socket Head Screw
90128A249
M4 x 0.70 mm Thread, 40 mm Long x2
Button Head Hex Drive Screw
91239A160
Number 6 Size, 1" Long x1 for optional printed charging handle
Rounded Head Thread-Forming Screws
97975A125