View this release
Alternative links
Picatinny MP7 Grip by Qwerm
A picatinny version of the folding grip from the MP7A1. This is designed with some tight tolerances so it will most likely require some post processing to get things to move smoothly. I recommend using a file and then running the moving parts back and forth until they move smoothly.
Print Orientation: Check included pictures for recommended print orientations.
Recommended Print Settings:
Layer Height: 0.2mm
Wall Line Count: 4
Infill Density: 30%+
Support: Yes
Fuzzy Skin: No
Required Hardware:
1x M5 30mm Socket Head Screw
1x M5 Hex Nut
1x 6mm E-Clip
1x 1/8" x 1" Roll Pin
1x 1 1/2" x 1/4" Compression Spring
This work is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit
http://creativecommons.org/licenses/by-nc-sa/4.0
LBRY Tags: 3d printed; 3dpg; mp7; guncad; picatinny
A picatinny version of the folding grip from the MP7A1. This is designed with some tight tolerances so it will most likely require some post processing to get things to move smoothly. I recommend using a file and then running the moving parts back and forth until they move smoothly.
Print Orientation: Check included pictures for recommended print orientations.
Recommended Print Settings:
Layer Height: 0.2mm
Wall Line Count: 4
Infill Density: 30%+
Support: Yes
Fuzzy Skin: No
Required Hardware:
1x M5 30mm Socket Head Screw
1x M5 Hex Nut
1x 6mm E-Clip
1x 1/8" x 1" Roll Pin
1x 1 1/2" x 1/4" Compression Spring
This work is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit
http://creativecommons.org/licenses/by-nc-sa/4.0
LBRY Tags: 3d printed; 3dpg; mp7; guncad; picatinny