View this release
Alternative links
the idea with this JIG is that you can use a extend hammer pin so the force is spread out more evenly over the lower. this pin is made out of a metal rod with a OD of 4mm in a length of 28mm.
in case this made to go with a 3d printed hammer like on the FGC6 then you don’t really need to print and use the jig. side the jig is there so help you make the grove were the detained of the hammer can go to lock in place.
LBRY Tags: fgc-9; fgc-9 mkii; fgc-9 mki; fgc-6; fgc-6 mkii
in case this made to go with a 3d printed hammer like on the FGC6 then you don’t really need to print and use the jig. side the jig is there so help you make the grove were the detained of the hammer can go to lock in place.
LBRY Tags: fgc-9; fgc-9 mkii; fgc-9 mki; fgc-6; fgc-6 mkii