View this release
Alternative links
3FTech PDW Sights: FFFTech/FFFTechnology
A set of basic adjustable sights for carbines, PDWs, large pistols, etc. that fit onto a 1913 Picatinny rail.
The front sight is 3mm wide, and can be driven in/out for elevation adjustment. The rear sight is lateral drift
adjustable, typical with pistol rear sights. A rear set screw secures the rear sight from being knocked out of
position, show the firearm it's mounted to be dropped.
Three rear drift sights are available:
*4mm U Notch
*5mm U Notch
*5.5mm Aperture
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 216C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40mm
Wall Perimeters: 3 - 5
Infill: 20%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 16%
Print the front and rear sight mounts on their front faces, and the rear sight drift on it's rear, flattest face.
Hardware Needed:
1x M5x30 Hex Socketed Machine Screw/Bolt
1x M5 Hex Nut (Be sure both bolt & nut are the same thread pitch.)
1x M3x10 Set Screw
1x M3x5 Set Screw
LBRY Tags: 3d printing; firearms; sights; iron sights; pdw
A set of basic adjustable sights for carbines, PDWs, large pistols, etc. that fit onto a 1913 Picatinny rail.
The front sight is 3mm wide, and can be driven in/out for elevation adjustment. The rear sight is lateral drift
adjustable, typical with pistol rear sights. A rear set screw secures the rear sight from being knocked out of
position, show the firearm it's mounted to be dropped.
Three rear drift sights are available:
*4mm U Notch
*5mm U Notch
*5.5mm Aperture
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 216C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40mm
Wall Perimeters: 3 - 5
Infill: 20%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 16%
Print the front and rear sight mounts on their front faces, and the rear sight drift on it's rear, flattest face.
Hardware Needed:
1x M5x30 Hex Socketed Machine Screw/Bolt
1x M5 Hex Nut (Be sure both bolt & nut are the same thread pitch.)
1x M3x10 Set Screw
1x M3x5 Set Screw
LBRY Tags: 3d printing; firearms; sights; iron sights; pdw