View this release
Alternative links
Cross Cut 1911 Grip Panels: FFFTech/FFFTechnology
A grip panel set for M1911 pistols (and compatible variants) with an interconnected cross pattern.
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4 - 6
Infill: 20% - 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%
Hardware Needed:
4x 1911 Grip Panel Screws
Accreditations:
GW-DD: Printed and assembled the grip panels onto their 1911. Provided images of the panels by themselves, as well as on the firearm.
LBRY Tags: 3d printing; firearms; 1911; grips; cross
A grip panel set for M1911 pistols (and compatible variants) with an interconnected cross pattern.
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4 - 6
Infill: 20% - 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%
Hardware Needed:
4x 1911 Grip Panel Screws
Accreditations:
GW-DD: Printed and assembled the grip panels onto their 1911. Provided images of the panels by themselves, as well as on the firearm.
LBRY Tags: 3d printing; firearms; 1911; grips; cross