View this release
Alternative links
CLICK ON THE IMAGE TO DOWNLOAD
12/7
-Polygon K can added to CF Nylon remix
-XL Breek added to maeltstrom
For maelstrom in rifle calibers: I think PLA print is possible, if sideways and the wrapped in 3M casting tape. If anybody tries it, let me know if it works
------------------------------------------------------
11/26
-All documentation for the full FTN.4 package updated. This is final release or close to it. Currently being reviewed by Gatalog admin
-A few remixes added. The international version of FTN.4, and also the CF nylon (for upright print)
-Improved maelstrom files, especially a new breek
-Redbull 22 should be a quick release
let me know if any errors with documentation. Also check the acknowledgements page and let me know if you dont want to be included or if i forgot you
-------------------------------------------------------
11/20
-progressing towards final package
-improved documentation
-stp files added
-------------------------------------
-Jmac added back in, with improved plug
-Maelstrom updated to thread adapters, no more breek/kak
-13/16x16 maelstrom 22 added, to go with breek threaded muzzle devices
-----------
11/11
-KAK cavity enlarged by 0.25mm, some reports of splitting print when printing in pa6cf due to shrinkage from nylon
--------------------
11/8
-improved maelstrom rifle and 9mm files
-------------------------------
11/4
two updates to printed piston files
-Form 1 rings have a top support now too (thanks for the suggestion Benjamin)
-Threads on lids have a small cutout for hexagon to slide through easily
If someone could try these files, that would be awesome, they are the priority now. If these can get tested and reconfirmed that these minor changes didn't fuck up anything, then these are pretty much final files.
I need to add a bar cutout for the osprey models for form 1, but otherwise this is (hopefully) the last change to files
-------------------------------------------------
11/3
-Fixed pistol model form 1 washers. I didn't change the readme, I changed the actual size on the model
-Improved maelstrom models
-------------------------
10/30
Breek Maelstrom file fixed
3/4x16 thread adapter maelstroms added for 22 and 9mm maelstroms
---------
10/29
-Maelstrom Breek added, along with improved shroud
-I found a minor error to the FTN 3.5 files, and they have been fixed
-Norco9 the newest Shush Pill has been added. Print in TPU
--------------------------
10/28
-KAK/Breek files I cleaned up supports that were going into steel rod holes
-there is only ONE printed piston now. Even if printing in pa6cf it needs to be reinforced either with brass tube, or fiberglass tape
-Rimfire has 2 options now. 32mm ID aluminum tube, or 33mm ID CF tube
-Round shotgun for 3" OD aluminum tube added. For shotgun, it sheared off my brass sight. You must use a steel sight. Brass will not survive!
-New Maelstrom suppressor added. This is ONLY Pa6cf or better. No PLA! This will be a flowthrough rifle can that has optional venturi shroud
Testing priorities:
-Printed piston needs testing
-FTN 3.5 needs testing. Especially by anybody who had high amounts of baffle wear for the FTN.4
----------------------------
10/19:
-I have added FTN 3.5 to the rifle files. These are FTN.4 features and sizing but with the old FTN3 baffles. I think that the FTN.4 baffles suffer from longevity issues so I wanted to add the 3.5 as the most durable option, even if FTN.4 is quieter
-Breek sizing has been changed by a hair, due to several of us (including me were having print breaking)
-Jmac back in, documentation and vids to come but basically you put the jmac into the print, then you tap in a plug, and then the rods hold it all together
-Shotgun is here. Needs https://www.ebay.com/itm/394506154779 and m4x35 nuts and bolts
-some minor errors corrected. Pistol 37/40 walls thickened, and wrong breek PCC fixed
-----------------------------------------
10/12
-Recent update showed that a UNREINFORCED baffle actually performed better than expected. I will add them back in. The CF rod version will be termed "Rebar" and the nonreinforced will have no name
-Jmac files are gone. I do not know if there is a way to use the Jmac BDS with rods. It will be cut from the final release. I will work on a remix for after the FTN.4 comes out
-Printed pistons were not sized for 45. This has been fixed. I may make the pa6CF piston upright print. For now, both are in there, but I will be testing this and choosing one
-37/40m
--------------------------------------
LBRY Tags: c:unlisted
12/7
-Polygon K can added to CF Nylon remix
-XL Breek added to maeltstrom
For maelstrom in rifle calibers: I think PLA print is possible, if sideways and the wrapped in 3M casting tape. If anybody tries it, let me know if it works
------------------------------------------------------
11/26
-All documentation for the full FTN.4 package updated. This is final release or close to it. Currently being reviewed by Gatalog admin
-A few remixes added. The international version of FTN.4, and also the CF nylon (for upright print)
-Improved maelstrom files, especially a new breek
-Redbull 22 should be a quick release
let me know if any errors with documentation. Also check the acknowledgements page and let me know if you dont want to be included or if i forgot you
-------------------------------------------------------
11/20
-progressing towards final package
-improved documentation
-stp files added
-------------------------------------
-Jmac added back in, with improved plug
-Maelstrom updated to thread adapters, no more breek/kak
-13/16x16 maelstrom 22 added, to go with breek threaded muzzle devices
-----------
11/11
-KAK cavity enlarged by 0.25mm, some reports of splitting print when printing in pa6cf due to shrinkage from nylon
--------------------
11/8
-improved maelstrom rifle and 9mm files
-------------------------------
11/4
two updates to printed piston files
-Form 1 rings have a top support now too (thanks for the suggestion Benjamin)
-Threads on lids have a small cutout for hexagon to slide through easily
If someone could try these files, that would be awesome, they are the priority now. If these can get tested and reconfirmed that these minor changes didn't fuck up anything, then these are pretty much final files.
I need to add a bar cutout for the osprey models for form 1, but otherwise this is (hopefully) the last change to files
-------------------------------------------------
11/3
-Fixed pistol model form 1 washers. I didn't change the readme, I changed the actual size on the model
-Improved maelstrom models
-------------------------
10/30
Breek Maelstrom file fixed
3/4x16 thread adapter maelstroms added for 22 and 9mm maelstroms
---------
10/29
-Maelstrom Breek added, along with improved shroud
-I found a minor error to the FTN 3.5 files, and they have been fixed
-Norco9 the newest Shush Pill has been added. Print in TPU
--------------------------
10/28
-KAK/Breek files I cleaned up supports that were going into steel rod holes
-there is only ONE printed piston now. Even if printing in pa6cf it needs to be reinforced either with brass tube, or fiberglass tape
-Rimfire has 2 options now. 32mm ID aluminum tube, or 33mm ID CF tube
-Round shotgun for 3" OD aluminum tube added. For shotgun, it sheared off my brass sight. You must use a steel sight. Brass will not survive!
-New Maelstrom suppressor added. This is ONLY Pa6cf or better. No PLA! This will be a flowthrough rifle can that has optional venturi shroud
Testing priorities:
-Printed piston needs testing
-FTN 3.5 needs testing. Especially by anybody who had high amounts of baffle wear for the FTN.4
----------------------------
10/19:
-I have added FTN 3.5 to the rifle files. These are FTN.4 features and sizing but with the old FTN3 baffles. I think that the FTN.4 baffles suffer from longevity issues so I wanted to add the 3.5 as the most durable option, even if FTN.4 is quieter
-Breek sizing has been changed by a hair, due to several of us (including me were having print breaking)
-Jmac back in, documentation and vids to come but basically you put the jmac into the print, then you tap in a plug, and then the rods hold it all together
-Shotgun is here. Needs https://www.ebay.com/itm/394506154779 and m4x35 nuts and bolts
-some minor errors corrected. Pistol 37/40 walls thickened, and wrong breek PCC fixed
-----------------------------------------
10/12
-Recent update showed that a UNREINFORCED baffle actually performed better than expected. I will add them back in. The CF rod version will be termed "Rebar" and the nonreinforced will have no name
-Jmac files are gone. I do not know if there is a way to use the Jmac BDS with rods. It will be cut from the final release. I will work on a remix for after the FTN.4 comes out
-Printed pistons were not sized for 45. This has been fixed. I may make the pa6CF piston upright print. For now, both are in there, but I will be testing this and choosing one
-37/40m
--------------------------------------
LBRY Tags: c:unlisted