View this release
Alternative links
Evo Edgerunner Strv Grip (CZ Scorpion Evo 3): Laffs Dynamics
Wake the fuck up, samurai; we have a 3D2A doc to write!
Skeletonized styled grip for the Scorpion Evo III. Has extra material between the skeletonized sections for extra reinforcement.
A grip for the masses to stand up to megacorpos; for those that love to run on the bleeding edge of 3DP2A tech.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .14mm - .16mm
Wall Thickness: .40
Wall Perimeters: 6+
Infill: 65%
Support Material Percentage: 18%
Print the grip upside-down.
Hardware Required:
1x M4x30mm Bolt (Can be ground down to 28mm so it doesn't stick out the side)
1x M4 Hex Nut
Credits:
AvesRails/AvesEngineering: SLS printed multiple grips in PA-12/Nylon 12 on a FormLabs Fuze 1.
LBRY Tags: 3d printing; firearms; socrpion evo; grip; edgerunner
Wake the fuck up, samurai; we have a 3D2A doc to write!
Skeletonized styled grip for the Scorpion Evo III. Has extra material between the skeletonized sections for extra reinforcement.
A grip for the masses to stand up to megacorpos; for those that love to run on the bleeding edge of 3DP2A tech.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .14mm - .16mm
Wall Thickness: .40
Wall Perimeters: 6+
Infill: 65%
Support Material Percentage: 18%
Print the grip upside-down.
Hardware Required:
1x M4x30mm Bolt (Can be ground down to 28mm so it doesn't stick out the side)
1x M4 Hex Nut
Credits:
AvesRails/AvesEngineering: SLS printed multiple grips in PA-12/Nylon 12 on a FormLabs Fuze 1.
LBRY Tags: 3d printing; firearms; socrpion evo; grip; edgerunner