
View this release
Alternative links
Auther: nameisnight
Details:
A modular 22lr suppressor.
Print Settings:
PLA+
3+ Walls
31+ Infill
Parts Needed
M5 Threaded Rod
2 M5 Nuts
Build Instructions
Print all parts and ans many Baffles as you wish to use.
Clean parts of any supports and check for under extrusion.
Stack together with Expantion chamber of choice followed by selected amount of baffles then the select end cap.
Take M5 threaded rod and messure how long you will need it from the expantion chamber to end cap and then cut it.
Thread the rod through the suppressor and use M5 nuts to tighten into place. DO NOT OVER TIGHTEN OR YOU MAY DAMAGE THE PARTS
The 1022 and 702 moddel will also need M3 bolts for attaching to the barrel.
LBRY Tags: 3d printed; fosscad; suppressor; 22lr; art
Details:
A modular 22lr suppressor.
Print Settings:
PLA+
3+ Walls
31+ Infill
Parts Needed
M5 Threaded Rod
2 M5 Nuts
Build Instructions
Print all parts and ans many Baffles as you wish to use.
Clean parts of any supports and check for under extrusion.
Stack together with Expantion chamber of choice followed by selected amount of baffles then the select end cap.
Take M5 threaded rod and messure how long you will need it from the expantion chamber to end cap and then cut it.
Thread the rod through the suppressor and use M5 nuts to tighten into place. DO NOT OVER TIGHTEN OR YOU MAY DAMAGE THE PARTS
The 1022 and 702 moddel will also need M3 bolts for attaching to the barrel.
LBRY Tags: 3d printed; fosscad; suppressor; 22lr; art