View this release
Alternative links
Remixed AR-15 Pistol Grip for Hoffman lower.
Features:
5degree cant
a2 style finger nub
thicc for more comfort
flush fit with Hoffman lower
fuzzy skin feel good
Issues:
screw installation might be difficult because the angle is a bit tight. A flex adapter might be a good idea for your hex screwdriver.
Prerequisites:
Hoffman lower if you want a (almost) seamless fit
Printer Settings:
Print upside down
Fuzzy Skin thickness 0.1mm
Fuzzy Skin Density 10mm
Exclusive tolerances in cura for all parts (only has been tested using this setting but may work fine without it)
Remixed From:
AR Pistol Grip 5 Deg Cant
by Patch1995
https://www.thingiverse.com/thing:4245438
Features:
5degree cant
a2 style finger nub
thicc for more comfort
flush fit with Hoffman lower
fuzzy skin feel good
Issues:
screw installation might be difficult because the angle is a bit tight. A flex adapter might be a good idea for your hex screwdriver.
Prerequisites:
Hoffman lower if you want a (almost) seamless fit
Printer Settings:
Print upside down
Fuzzy Skin thickness 0.1mm
Fuzzy Skin Density 10mm
Exclusive tolerances in cura for all parts (only has been tested using this setting but may work fine without it)
Remixed From:
AR Pistol Grip 5 Deg Cant
by Patch1995
https://www.thingiverse.com/thing:4245438