Release image

M47 Style Spherical Grenade

Stubbs Customs 719.3KiB Nov. 6, 2023, 7:15 p.m.

ATF Form 1 Destructive Device Grenade

This spherical grenade project is inspired by the M47 CS smoke grenade. The body can be filled with standard smoke grenade fillers. It uses standard M228 internal parts, the hammer, spring, and pin. This grenade project uses a printable spoon and safety lever, and a printable body.

The optional rotating safety lever is to be bolted onto the spoon and when in the detent in the forward position the lever will stay in place with the pin pulled as a safety mechanism if the grenade is made to proper tolerances and tested correctly for proper function. The bolt for the optional safety lever is an M5 bolt and the spoon must be tapped with an M5 tap.

The two halves should be glued securely in place before the hammer is installed, and the smoke exhaust port can be sealed by any reasonable means. The original is just a piece of tape.

On 11-8-2023 these files were updated to the release version. The in progress parts that were uploaded did not have a clearance cut for the hammer. To modify existing shells ensure the hammer clears the edge and trim it with a file, ensuring enough is left on the sides for the spoon to be retained.

LBRY Tags: smoke; grenade; m47; cs; stubbs