View this release
Alternative links
MOE AAA & CR2032 Grip Insert by Qwerm
An insert for a Magpul MOE grip that holds one CR2032 and three AAA batteries.
Print Orientation: Print everything on it's flat side (facing up for the base, facing down for the cap).
Settings used:
Material: PLA+
Extruder Temp: 210c
Bed Temp: 60c
Layer Height: 0.2mm
Wall Line Count: 4
Infill Percentage: 100%
For the cap use the following support:
Support Structure: Tree
Tree Support Branch Angle: 50
Support Placement: Touching Buildplate
LBRY Tags: 3d print; moe; magpul
An insert for a Magpul MOE grip that holds one CR2032 and three AAA batteries.
Print Orientation: Print everything on it's flat side (facing up for the base, facing down for the cap).
Settings used:
Material: PLA+
Extruder Temp: 210c
Bed Temp: 60c
Layer Height: 0.2mm
Wall Line Count: 4
Infill Percentage: 100%
For the cap use the following support:
Support Structure: Tree
Tree Support Branch Angle: 50
Support Placement: Touching Buildplate
LBRY Tags: 3d print; moe; magpul