225
17
View this release
Alternative links
IF YOU ARE IN NEED OF A PISS RECEPTACLE, THIS IS CERTAINLY ONE.
DESIGNED FOR A BED 250X250X250 OR LARGER. IF YOU SCALE IT THE ADAPTER THREADING WILL NOT WORK BUT WITH SOME HEAT AND MAGIC IT MIGHT. 8 WALLS RECOMMENDED WITH 25% INFILL. IT'LL TAKE A WHOLE ROLL. NORMAL SUPPORTS FOR UNDER DRAIN AND INLET AS WELL AS THE RIM OVERHANG.
YOU WILL NEED 3/4" BRASS GARDEN HOSE REPAIR ADAPTERS WITH HOSE CLAMPS. THESE WORK: https://www.amazon.com/dp/B0BXHL58HG
BEFORE SCREWING IN AN ADAPTER, HEAT IT UP WITH A HEAT GUN OR MELTY STICK AND SCREW IT IN WITH A WRENCH. ENSURE IT IS NOT GOING IN AT AN ANGLE. ONCE COOLED YOU SHOULD HAVE A GOOD SEAL. ATTACH YOUR WATER HOSE INTO THE TOP ADAPTER AND YOUR DRAIN HOSE INTO THE BOTTOM. YOU SHOULD PROBABLY DIRECT THE DRAIN HOSE SOMEWHERE OTHER THAN YOUR FLOOR BUT THAT'S UP TO YOU. MAYBE YOU'RE INTO THAT.
LISTEN, THIS IS A PLASTIC PISSER AND FDM IS POROUS TO SAY THE LEAST. RUN SOME DISINFECTANT LIKE STAR-SAN THROUGH IT FROM TIME TO TIME.
PISS ON CHOOMS
DESIGNED FOR A BED 250X250X250 OR LARGER. IF YOU SCALE IT THE ADAPTER THREADING WILL NOT WORK BUT WITH SOME HEAT AND MAGIC IT MIGHT. 8 WALLS RECOMMENDED WITH 25% INFILL. IT'LL TAKE A WHOLE ROLL. NORMAL SUPPORTS FOR UNDER DRAIN AND INLET AS WELL AS THE RIM OVERHANG.
YOU WILL NEED 3/4" BRASS GARDEN HOSE REPAIR ADAPTERS WITH HOSE CLAMPS. THESE WORK: https://www.amazon.com/dp/B0BXHL58HG
BEFORE SCREWING IN AN ADAPTER, HEAT IT UP WITH A HEAT GUN OR MELTY STICK AND SCREW IT IN WITH A WRENCH. ENSURE IT IS NOT GOING IN AT AN ANGLE. ONCE COOLED YOU SHOULD HAVE A GOOD SEAL. ATTACH YOUR WATER HOSE INTO THE TOP ADAPTER AND YOUR DRAIN HOSE INTO THE BOTTOM. YOU SHOULD PROBABLY DIRECT THE DRAIN HOSE SOMEWHERE OTHER THAN YOUR FLOOR BUT THAT'S UP TO YOU. MAYBE YOU'RE INTO THAT.
LISTEN, THIS IS A PLASTIC PISSER AND FDM IS POROUS TO SAY THE LEAST. RUN SOME DISINFECTANT LIKE STAR-SAN THROUGH IT FROM TIME TO TIME.
PISS ON CHOOMS
Related to This Release
98
5
Dagger Micro TLR-7 HL-X key
This light isn't intended for the Dagger Micro as I found out after the fact. This key will index it properly but you may still have issues tightenin…
78
5
SVTR DMB Picatinny Top (+2mm & +3mm)
Zero disrespect to DMB, just found that, in my opinion, the original pic rail top for the removable top mod was a little too close to the base to be …
634
17
Enigmish Plate - Independant Belt Printed Holster Concealment System
TPU plate for creating your own Enigma-like holster. Intended for use with the Lynx Nightstalker holsters (In beta on the Gatalog, JOIN TODAY) but sh…
72
6
38 Special Spiral Vase Ammo box 20 rounds
This is a 20 round 38 Special ammo box with all 3 pieces being printed in spiral vase mode.
This makes for quick prints that look good and only use…
55
2
AWCY? Operation: Fast and Furious (Apple AirTag Holder)
Apple Air Tag Holder by 3DPrintFreedom
Be fast. Be furious. Track your guns better than the Bush and Obama Administration.
Shared under Attribution…
Twitter
Matrix
Source
