
View this release
Alternative links
47-11 AKM Grips: FFFTech/FFFTechnology
Grips for AK pattern / AKM rifles; with similar overall geometry of Browning 1911 pistol's grip.
Two variants are available, each with two subvariants:
*Standard
*Integrated Panel, Standard
*Micro Ridge
*Integrated Panel, Micro Ridge
OEM and aftermarket full sized 1911 grip panels, as well as FFFTech 1911 grip panels are compatible;
and are a drop in fit.
(Integrated Panel subvariant grips DO NOT use grip screws, nor grip screw bushings.)
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 55C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%+
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%
Print the grip upside down
Support Material ONLY needed for the grip screw bushing ports, and below the INTEGRATED grip panels. Use the support
blocker setting in the preferred slicer program for everywhere else within the model.
Hardware Needed:
1x OEM AK Grip Screw
4x (OPTIONAL) 1911 Grip Screw Bushings
4x (OPTIONAL) 1911 Grip Screws
Notes:
1) When installing grip screw bushings, use RED Loctite and let cure for at LEAST 24 hours before grip
panel installation.
LBRY Tags: 1911; 3d printing; ak; firearms; grip
Grips for AK pattern / AKM rifles; with similar overall geometry of Browning 1911 pistol's grip.
Two variants are available, each with two subvariants:
*Standard
*Integrated Panel, Standard
*Micro Ridge
*Integrated Panel, Micro Ridge
OEM and aftermarket full sized 1911 grip panels, as well as FFFTech 1911 grip panels are compatible;
and are a drop in fit.
(Integrated Panel subvariant grips DO NOT use grip screws, nor grip screw bushings.)
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 55C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%+
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%
Print the grip upside down
Support Material ONLY needed for the grip screw bushing ports, and below the INTEGRATED grip panels. Use the support
blocker setting in the preferred slicer program for everywhere else within the model.
Hardware Needed:
1x OEM AK Grip Screw
4x (OPTIONAL) 1911 Grip Screw Bushings
4x (OPTIONAL) 1911 Grip Screws
Notes:
1) When installing grip screw bushings, use RED Loctite and let cure for at LEAST 24 hours before grip
panel installation.
LBRY Tags: 1911; 3d printing; ak; firearms; grip