762
14
View this release
Alternative links
-! UNTESTED !-
Please read the ReadMe file!
Included are the SolidWorks, Step and 3mf files.
This is ment to be mechined as it would NOT be safe to 3D-Print!.
Striker should be Stainless Steel and the Rest can be 6065 Alm.
This is a DD (Destructive Device) and is Subject to the NFA.
LBRY Tags: 3d printed; gun; 37mm; nfa; fosscad
Please read the ReadMe file!
Included are the SolidWorks, Step and 3mf files.
This is ment to be mechined as it would NOT be safe to 3D-Print!.
Striker should be Stainless Steel and the Rest can be 6065 Alm.
This is a DD (Destructive Device) and is Subject to the NFA.
LBRY Tags: 3d printed; gun; 37mm; nfa; fosscad
Related to This Release
1212
18
StackA an Attempt at a 22lr Flowthrough Suppressor
Print front down, threads up, PLA+ or better, 5+ walls and 100% infil
Threaded for 3/4-28 and Bored for 22lr,22short,22cp,17hmr
Prototype, untested…
862
10
37mm Sub-Caliber Devices
2 Sub-Caliber Devices for 37mm Lounchers.
1 22lr
1 .410
Please read the Instructions and follow them, missuse can result in injory or death!
Inc…
1719
36
22lr Modular Suppressor 1/2-28, 10/22, 702 Plinkster
Auther: nameisnight
Details:
A modular 22lr suppressor.
Print Settings:
PLA+
3+ Walls
31+ Infill
Parts Needed
M5 Threaded Rod
2 M5 Nuts
…
3256
30
Suppressed Barrel for the Gambino and Cabfare
A 3D printed Suppressor for your Gambino or Cabfare 22lr gun!
Print Settings:
PLA+ or Stronger
.16 or Lower Detail
100% Infill
20 Walls Top and B…
4
Experimental Untested 3D printed40mm batons and buckshot
Experimental Untested 3D printed40mm batons and buckshot. The batons were based off the manufacturer cross section views and were not precisely measu…
Twitter
Matrix
Source
