730
14
3D printed 37MM projectiles designed to use with payload, smoke or flare. Regular PLA is sufficient.
Print the base plate solid, 99 walls or 3-5 walls with 100% infill. The rest can be printed with 3 walls and 15% infill.
The hole in top cap can accommodate a .450 projectile as counterweight. The weighted top cap and the fin will make the projectile fly like a badminton ball.
2323/12/19 update: 2 more head caps to fit 14.5mm M183 lead point detonating projectiles.
LBRY Tags: 3d printing; art
Print the base plate solid, 99 walls or 3-5 walls with 100% infill. The rest can be printed with 3 walls and 15% infill.
The hole in top cap can accommodate a .450 projectile as counterweight. The weighted top cap and the fin will make the projectile fly like a badminton ball.
2323/12/19 update: 2 more head caps to fit 14.5mm M183 lead point detonating projectiles.
LBRY Tags: 3d printing; art
Related to This Release
499
9
1
Tug's 37mm Chalk Round (3dp)
Hull is not my design, projectile is designed to fit nicely. These are designed to work together. Not sure if they'll work with other stuff. Am I Coo…
382
8
NT79 Receiver Reinforced Lever Unlock Round Breech
Updated reinforced lever unlock NT79 receiver for folks with a lathe. Designed for easier machining of a metal breech using 1.5" bar stock.
LBRY Ta…
200
11
26.5mm Trollwerks Chalk Round
Chalk round for the Trollwerks aluminum shell casings. Fill with chalk powder and seal with something like hot glue.
LBRY Tags: trollwerks; 26.5; ch…
116
6
37mm 26.5mm LoadAll Conversion
Conversion for a Lee LoadAll to load 37mm and 26.5 flare hulls.
LBRY Tags: 37mm; 26.5mm; 37; 26.5; loadall conversion
82
7
1
Fence Post BCAM-SD-34SC-1-A
A mod for the "BCAM-SD-34SC-1-A" that lets you use a fence post (or 42mm OD, 38mm/39mm ID tubing of some kind) to make a 37mm instead of the 34mm it …
Twitter
Matrix
Source
