View this release
Alternative links
Precision Grip (AR-15): FFFTech/FFFTechnology
A design created mimicking the PSG-1's grip. Has a palm rest that can be adjusted vertically, and also can be
adjusted for different pitch and roll angles. The top of the grip area has thumb rests that extend 9mm forward.
Has wide finger grooves.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 216C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 20%
(Support material only needed for finger grooves, underside of thumb rests, and through bolt slots.)
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
1x M5x40 Hex Socketed Machine Screw/Bolt
1x M5 Hex Nut (Be sure both bolt & nut are the same thread pitch.)
LBRY Tags: 3d printing; firearms; precision; grip; ar-15
A design created mimicking the PSG-1's grip. Has a palm rest that can be adjusted vertically, and also can be
adjusted for different pitch and roll angles. The top of the grip area has thumb rests that extend 9mm forward.
Has wide finger grooves.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 216C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 20%
(Support material only needed for finger grooves, underside of thumb rests, and through bolt slots.)
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
1x M5x40 Hex Socketed Machine Screw/Bolt
1x M5 Hex Nut (Be sure both bolt & nut are the same thread pitch.)
LBRY Tags: 3d printing; firearms; precision; grip; ar-15