View this release
Alternative links
Strike 90 Grip (AR-15): FFFTech/FFFTechnology
A 0°/90° angled grip designed for CQC. Swells from 22.3mm at the top section, and out to 26mm at the bottom.
Has side palm scallops across the bottom-sides of the grip.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
LBRY Tags: 3d printing; ar15; firearms; grip; vertical
A 0°/90° angled grip designed for CQC. Swells from 22.3mm at the top section, and out to 26mm at the bottom.
Has side palm scallops across the bottom-sides of the grip.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
LBRY Tags: 3d printing; ar15; firearms; grip; vertical