View this release
Alternative links
This is a remix of Hoffman Tacticals' AR-15 lower (V2.6) into an AR-9 platform. It uses a traditional Ejector, not like the custom ones found in previous 3d printed options.
Hardware needed:
1x 2'' Hose Clamp
2x 5mmx30mm Socket Bolts (+nuts) for the front take down brackets (https://www.boltdepot.com/Product-Details.aspx?product=6525)
1x 3/32'' diameter rod for the Roll Pin on the Bolt Catch and for the Magazine Release. you only need about 3-4 inches ( I get mine at Lowes, they sell it as "Assorted Piano Wire")
2x 2.5x20mm socket bolts (+nuts) for the Ejector
Happy Printing!
LBRY Tags: 3d print; ar-9; hoffman tactical
Hardware needed:
1x 2'' Hose Clamp
2x 5mmx30mm Socket Bolts (+nuts) for the front take down brackets (https://www.boltdepot.com/Product-Details.aspx?product=6525)
1x 3/32'' diameter rod for the Roll Pin on the Bolt Catch and for the Magazine Release. you only need about 3-4 inches ( I get mine at Lowes, they sell it as "Assorted Piano Wire")
2x 2.5x20mm socket bolts (+nuts) for the Ejector
Happy Printing!
LBRY Tags: 3d print; ar-9; hoffman tactical