View this release
Alternative links
Corser Baseplate Pack: Glock Mags
-10 Baseplate units in total.
Top(Grey): Lipped Bottom
Designed Print Orientation: Front face
+2
+3
+4
+5
Bottom(White): Flat Bottom
Multiple Print Orientations: Front or Bottom faces.
+2
+3
+4
+5
+6
+7
-Stl Print Orientation set to Front face added better strength.
-Avoid Using Magazine Spring Inserts.
-Ensure magazine spring does not travel rearward during the last half of the installation by setting the unit halfway on and inspecting the gap between the magazine bottom and the new baseplate. Push magazine spring down before setting baseplate into the locked position.
-Some baseplates may require stronger springs to function properly with your firearm. This is at the user's discretion.
-Baseplates Designed around Gen.3 Magazine: OEM Glock 17, OEM Glock26, Pro-Mag 30rd
-Added Retaining lip for strong securement. Multiple removals of baseplates from magazine could weaken rear retaining lip if printed in PLA.
-Works with Full, Compact, and Sub-Compact Frames.
-Works with P80 Frames(and with aftermarket Mag-well Flares)
Recommended Filaments:
1- PET-CF
2- PAHT-CF
3- Esun PLA+
Recommended Setting: Wall Loops: 4 Infill: Gyroid Density: 60%
Update:
-STEP File Added
-Compressed to ZIP Folder
-Please state "remix" and/or original link within your edited upload.
*Corser project updates will continue on the Corser 1 page.
Thank you for viewing. Stay tuned and rate accordingly.
LBRY Tags: glock; baseplate; gen3; +5; mag
-10 Baseplate units in total.
Top(Grey): Lipped Bottom
Designed Print Orientation: Front face
+2
+3
+4
+5
Bottom(White): Flat Bottom
Multiple Print Orientations: Front or Bottom faces.
+2
+3
+4
+5
+6
+7
-Stl Print Orientation set to Front face added better strength.
-Avoid Using Magazine Spring Inserts.
-Ensure magazine spring does not travel rearward during the last half of the installation by setting the unit halfway on and inspecting the gap between the magazine bottom and the new baseplate. Push magazine spring down before setting baseplate into the locked position.
-Some baseplates may require stronger springs to function properly with your firearm. This is at the user's discretion.
-Baseplates Designed around Gen.3 Magazine: OEM Glock 17, OEM Glock26, Pro-Mag 30rd
-Added Retaining lip for strong securement. Multiple removals of baseplates from magazine could weaken rear retaining lip if printed in PLA.
-Works with Full, Compact, and Sub-Compact Frames.
-Works with P80 Frames(and with aftermarket Mag-well Flares)
Recommended Filaments:
1- PET-CF
2- PAHT-CF
3- Esun PLA+
Recommended Setting: Wall Loops: 4 Infill: Gyroid Density: 60%
Update:
-STEP File Added
-Compressed to ZIP Folder
-Please state "remix" and/or original link within your edited upload.
*Corser project updates will continue on the Corser 1 page.
Thank you for viewing. Stay tuned and rate accordingly.
LBRY Tags: glock; baseplate; gen3; +5; mag