View this release
Alternative links
Waffle AK-74M/101 Tanker Magazine (20rd): Laffs
Waffle patterned 3DP dual caliber AK platform magazine, for use in AKs chambered in 5.45x39, or 5.56x45 NATO. Caliber changes are
quick via swapping out the follower. Floorplate, baseplate, locking tab, and magazine body are the same between calibers.
Has the same strong separately printed locking tab used in the ProxyMag, Waco Waffle, and Slabslav series of Laffs Dynamics AK magazines.
20rd "Tanker" variant of the original Laffs Dynamics Waffle AK-74/101 30rd mag.
Weapons Tested In:
1x WBP Mini Jack 5.56 AK (Polish Import)
1x PSAK-74 AK (American Production)
Basic Print Settings:
Filament Used: PLA+
Print Settings:
Extruder: 218C - 220C
Bed: 56C - 60C
First Layer Print Height: .2mm
Standard Layer Height: .16mm (.12mm for the Follower & Locking Tab)
Wall Thickness: .40
Wall Perimeters: 7
Infill: 75%+
Support Material Percentage: 18%
Hardware:
1x Original AK-74 mag spring, or listed compatible mag spring. (See Notes Below)
Epoxy or Clear Gorilla Glue
Parts Installation:
1) Apply cyanoacrylate adhesive inside the pocket for the rear locking lug. If the rear locking lug is slightly loose
in the pocket, apply Clear Gorilla Glue. Wait 24hrs for the adhesive to cure.
2) Insert the rear locking lug, with the angled facet facing outwards, and down towards the mag body's base.
3) Lightly sand the anti-friction follower's sides and curved spine.
4) Slide the top of the magazine spring through the front of the follower, above the spring retention tab.
5) Attach the floorplate to the bottom of the magazine spring, making sure the first spring winding snaps over the
retainers.
6) Slide the internal spring assembly into the magazine body.
7) Depress the floorplate, and slide on the baseplate. The floorplate's locking tab must index with the channel in the
baseplate.
Notes:
1) Polish Beryl, WBP- 5.56/223, Promag AK-74, and Wolff mag springs are compatible with this magazine.
2) Polish Beryl follower was tested and works in the printed mag body, but the bottom-most round will be loosely held in place.
3) Testing concluded you can use a standard 30rd length, standard pressure mag spring and still load safely 20rds. Its still advised you cut
down springs to 20rd lengths, but it is not required.
Credits:
ProSpaceDog: Provided Borzoi AK prototype and Polish Jack AK for magazine fitment and function.
Anon (Name To Not Be Shared Per Contract): Requested 20rd variant of the original 30rd magazine design, payment received upon contract completion.
LBRY Tags: 3d printing; firearms; ak; magazine; tanker; c:disable-slimes-comments; c:disable-slimes-video; c:disable-reactions-comments; c:disable-reactions-video
Waffle patterned 3DP dual caliber AK platform magazine, for use in AKs chambered in 5.45x39, or 5.56x45 NATO. Caliber changes are
quick via swapping out the follower. Floorplate, baseplate, locking tab, and magazine body are the same between calibers.
Has the same strong separately printed locking tab used in the ProxyMag, Waco Waffle, and Slabslav series of Laffs Dynamics AK magazines.
20rd "Tanker" variant of the original Laffs Dynamics Waffle AK-74/101 30rd mag.
Weapons Tested In:
1x WBP Mini Jack 5.56 AK (Polish Import)
1x PSAK-74 AK (American Production)
Basic Print Settings:
Filament Used: PLA+
Print Settings:
Extruder: 218C - 220C
Bed: 56C - 60C
First Layer Print Height: .2mm
Standard Layer Height: .16mm (.12mm for the Follower & Locking Tab)
Wall Thickness: .40
Wall Perimeters: 7
Infill: 75%+
Support Material Percentage: 18%
Hardware:
1x Original AK-74 mag spring, or listed compatible mag spring. (See Notes Below)
Epoxy or Clear Gorilla Glue
Parts Installation:
1) Apply cyanoacrylate adhesive inside the pocket for the rear locking lug. If the rear locking lug is slightly loose
in the pocket, apply Clear Gorilla Glue. Wait 24hrs for the adhesive to cure.
2) Insert the rear locking lug, with the angled facet facing outwards, and down towards the mag body's base.
3) Lightly sand the anti-friction follower's sides and curved spine.
4) Slide the top of the magazine spring through the front of the follower, above the spring retention tab.
5) Attach the floorplate to the bottom of the magazine spring, making sure the first spring winding snaps over the
retainers.
6) Slide the internal spring assembly into the magazine body.
7) Depress the floorplate, and slide on the baseplate. The floorplate's locking tab must index with the channel in the
baseplate.
Notes:
1) Polish Beryl, WBP- 5.56/223, Promag AK-74, and Wolff mag springs are compatible with this magazine.
2) Polish Beryl follower was tested and works in the printed mag body, but the bottom-most round will be loosely held in place.
3) Testing concluded you can use a standard 30rd length, standard pressure mag spring and still load safely 20rds. Its still advised you cut
down springs to 20rd lengths, but it is not required.
Credits:
ProSpaceDog: Provided Borzoi AK prototype and Polish Jack AK for magazine fitment and function.
Anon (Name To Not Be Shared Per Contract): Requested 20rd variant of the original 30rd magazine design, payment received upon contract completion.
LBRY Tags: 3d printing; firearms; ak; magazine; tanker; c:disable-slimes-comments; c:disable-slimes-video; c:disable-reactions-comments; c:disable-reactions-video