View this release
Alternative links
STEP files for Zenit RK-6
BOM:
- 2x M3x30 SHCS
- 2x M3 nuts
- 1x M4x25 CSCS
- 1x M4 nut
Assembly should be self explanatory I hope.
Print settings:
- PLA+ (eSun or Polymaker preferred) or better
- 4 walls minimum, 6 optimal
- 75% gyroid infill minimum.
Optional:
- Glow in the dark filament
Bonus Achievement:
- Mount on a 37mm launcher
It may be a bit tight to get the mount to slide in depending on the filament. I had to tap it in with a hammer. glhf.
More coming probably idfk
LBRY Tags: 3d2a; zenit; foregrip; rk6
BOM:
- 2x M3x30 SHCS
- 2x M3 nuts
- 1x M4x25 CSCS
- 1x M4 nut
Assembly should be self explanatory I hope.
Print settings:
- PLA+ (eSun or Polymaker preferred) or better
- 4 walls minimum, 6 optimal
- 75% gyroid infill minimum.
Optional:
- Glow in the dark filament
Bonus Achievement:
- Mount on a 37mm launcher
It may be a bit tight to get the mount to slide in depending on the filament. I had to tap it in with a hammer. glhf.
More coming probably idfk
LBRY Tags: 3d2a; zenit; foregrip; rk6