View this release
Alternative links
Link to Tube: https://a.co/d/dbUjdc2 Link to Thread Adapter: https://a.co/d/1ZB2jxq
I use the Red & Black Original JB Weld to secure the thread adapter into the Threads of the FTN. I then use it to sandwich the thread adapter with the end cap. Then I spread it all over the FTN with the End cap that has sandwiched the thread adapter and on the inside of the Carbon Tube. I then slide the FTN w/endcap into the Carbon Tube and clean off all the excess JB Weld that comes out. I then use a clamp or some kind of weight to keep the tube from sliding back off until it has had time to dry. If you have any questions just message me on Reddit, my user name is 300blkFDE. I forgot to mention, I cut the carbon tube just a little longer roughly 7" and then once everything is dry I use a sander to sand the threaded end of the Carbon tube down flush with the FTN.
I use the Red & Black Original JB Weld to secure the thread adapter into the Threads of the FTN. I then use it to sandwich the thread adapter with the end cap. Then I spread it all over the FTN with the End cap that has sandwiched the thread adapter and on the inside of the Carbon Tube. I then slide the FTN w/endcap into the Carbon Tube and clean off all the excess JB Weld that comes out. I then use a clamp or some kind of weight to keep the tube from sliding back off until it has had time to dry. If you have any questions just message me on Reddit, my user name is 300blkFDE. I forgot to mention, I cut the carbon tube just a little longer roughly 7" and then once everything is dry I use a sander to sand the threaded end of the Carbon tube down flush with the FTN.