View this release
Alternative links
Interlock D.R.U.M. Mag Cover: Laffs
Cover for the DMB Co. D.R.U.M. Magazine. Has an interlocking pattern, *mostly* continuous modeled channel.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 7+
Infill: 45%+
Support Material Percentage: 20%
Print the cover on it front face.
Notes:
1) This data pack is just for printing the cover. To get the base magazine data pack, use the following link:
(https://odysee.com/@AreWeCoolYet:7/DannysDrumMags)
Credit:
Danny Meatball: Creator of the DMB Co. D.R.U.M. Magazine. Used the base model of his mag's front cover for this design.
LBRY Tags: 3d printing; firearms; drum; magazine; interlock; c:disable-slimes-comments; c:disable-slimes-video; c:disable-reactions-comments; c:disable-reactions-video
Cover for the DMB Co. D.R.U.M. Magazine. Has an interlocking pattern, *mostly* continuous modeled channel.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 7+
Infill: 45%+
Support Material Percentage: 20%
Print the cover on it front face.
Notes:
1) This data pack is just for printing the cover. To get the base magazine data pack, use the following link:
(https://odysee.com/@AreWeCoolYet:7/DannysDrumMags)
Credit:
Danny Meatball: Creator of the DMB Co. D.R.U.M. Magazine. Used the base model of his mag's front cover for this design.
LBRY Tags: 3d printing; firearms; drum; magazine; interlock; c:disable-slimes-comments; c:disable-slimes-video; c:disable-reactions-comments; c:disable-reactions-video