3467
30
2
View this release
Alternative links
22lr Suppressor
by nameisnight
Wanted to mess around with geometry and see if i could make a better baffle then the round ones normaly made.
We need to think outside the box with 3D printing, We are no longer stuck making round baffles.
Tested Print Settings
PLA+ or Better
.12mm Layers
5 Walls
100% Infill
Print with up, front port on hotplate
No Supports
Threaded in 1/2-28, Tested with 22lr Sub-Sonics and Standard.
Be sure to inspect the suppressor to make sure there is no deformation or melted areas.
LBRY Tags: 3d printed; art; fosscad; nfa; suppressor
by nameisnight
Wanted to mess around with geometry and see if i could make a better baffle then the round ones normaly made.
We need to think outside the box with 3D printing, We are no longer stuck making round baffles.
Tested Print Settings
PLA+ or Better
.12mm Layers
5 Walls
100% Infill
Print with up, front port on hotplate
No Supports
Threaded in 1/2-28, Tested with 22lr Sub-Sonics and Standard.
Be sure to inspect the suppressor to make sure there is no deformation or melted areas.
LBRY Tags: 3d printed; art; fosscad; nfa; suppressor
Related to This Release
566
12
.22LR shushy thingy
.22Lr suppressor, designed and tested by me :D not that many rounds but roughly 200. ()
Did Finite Element Analysis (FEA) on it and it's supposed to …
734
13
Reflector 8mm Suppressor Project
Put pause in print at Layer 158 if printing in 0.2, insert 4 of the reflectors and resume print.
Hole ID is ~8mm so it might work for 32acp
not sure …
2635
15
22lr 3D printable Solvent Trap
A complete 3D printable "Solvent Trap" for any 1/2-28 threaded Rifle. It will thread directly onto the barrel. STL files included, Follow me for more…
1652
25
22lr Suppressor for the Borebuddy RQD
My D1.3BB design but threaded for Borebuddys RQD (Rimfire Quick Disconnect) muzzle devices.
* PLA+ or Better
* .2 or Higher Detail
* 5 Walls
* 100% …
1511
13
C Prototype 22lr Flowthrough Suppressor
Print face down, threads up, 100% Infill 5Walls, PLA+
Threaded in 3/4-10, for use with 22lr, 22short, etc
Untested
LBRY Tags: 3d printed; art; …
Twitter
Matrix
Source
