311
9
View this release
Alternative links
Update: Confirmed to be working. Needed to basically bore out with 3/8ish (10mm) drill bit. Feed ramp from ez22 fits fine. I just used a little jb weld to attach it.
Trying to work out a collar for a dedicated ar22 or dedicated 22 proto barrel to work with the EZ22. I'm too cheap to buy one so I tried to make one to work with an extra ScARpion 22 proto barrel I had. You will more than likely have to bore out the hole a little to fit over proto barrel and possibly on the back side to make it sit flush. Uses EZ22 feed ramp but could need a little off the back to sit flush. If I like the design and it works I'll try to make changes to the model for less post processing but my cad skills are very limited.
LBRY Tags: ez22; proto barrel; ar22; 3d printing; 3d2a
Trying to work out a collar for a dedicated ar22 or dedicated 22 proto barrel to work with the EZ22. I'm too cheap to buy one so I tried to make one to work with an extra ScARpion 22 proto barrel I had. You will more than likely have to bore out the hole a little to fit over proto barrel and possibly on the back side to make it sit flush. Uses EZ22 feed ramp but could need a little off the back to sit flush. If I like the design and it works I'll try to make changes to the model for less post processing but my cad skills are very limited.
LBRY Tags: ez22; proto barrel; ar22; 3d printing; 3d2a
Related to This Release
326
7
Daichi Barrel Nut for Dedicated 22 AR Barrels
This is a barrel nut to use the Daichi handguards with my Dedicated 22 AR barrels. Essentially just added the chamfer on mating surface.
**Untested…
419
13
<<V3.1>> AR22 Tower for deAR22 Drum Mag (Public Beta)
A new deAR22 drum mag tower for your favorite AR22.
This zip file contains the F3D file from fusion, STL, and the DeAR22 file set.
Everything you ne…
148
2
The Ruger 10-22 Exotic Weapons System [Revised Edition]
The Ruger 10-22 Exotic Weapons System
372
8
DS1913 lower with spring retention for RC spring (EZ22)
No description provided for this release
11673
59
2
EZ22 open beta by plastic blasters V0.93
an easy to assemble, fully printed ar15 upper and bolt designed for 22lr. this is a beta so expect and please report issues
updated to include links …
Twitter
Matrix
Source
