Release image

FGC9-MKII MKIISD UNW227 shroud FGC6-MKII

@UntangleWORKS 13.9MiB July 8, 2022, 12:36 p.m.

9x19mm FGC-9 Hybrid Firearm

these MKIISD shroud models will work on the MKII platform. but it haves some upgrades from the FGC9SD.
what does the MKIISD update mean?

the main update and why these are called MKIISD are that I took some improvements from the FGC9 SD and placed in the MKII shroud models that I designed. but keep in mind the are still made to just work with the MKII this is because the rail stands higher then the SD does.

so the magnet design of the MKII have been removed. and the SD style magnet have been added. the to install it is basically the same. but you will be using a cylindrical magnet with a OD of 5mm and 10mm long in size.

and wile I’m add it did I also add the grove that prevents the barrel from rotating

--

this new 2022 series will have the option of a bolt on top rail. (yes, I have gotten those requests over the years)
but the real reason I made it's that this shroud will soon also have a lower rail option. that is made possible by using different M3 bolts.
but more on that later

(the low rails set have been added!) they will look weak when you take them from your printer. but once mounted they should work fine. this will lower the rail a bit. this have been done before but so far I know of not in this way before. for this set will you use: Flat Countersunk Head M3 Screws in a lengt of 14mm

the name 227 stands for the barrel length this is made for. but this is the same length as what

was called the M shrouds in the past like the: 2021 LB short, AK shroud, TEC9 M, LB short.

this set will also include a special mandril custom made for me by ImmortalRevolt that can be used with the ECM v3 set that can be found here. https://odysee.com/@c0ld_d8rk_h8nd:8/ECM-Barrels-v3.5:e

LBRY Tags: fgc; fgc9; fgc6; fgc9 mkii; fgc9 mkiisd