View this release
Alternative links
Developer Alexis created the 22EZ Weapons Platform and released it in August 2021 this design was a slam fire .22LR with much inspiration from the 22NSS
"Release date:
----------------
23Aug2021
BCAM-WS-22EZ-1-A
----------------
Black Cat Aircraft & Manufacturing
-
Weapon Systems
-
22 EZ
-
model 1
-
version A
Print settings:
----------------
Everything is in the print settings guide
Printing Remarks:
----------------
Assembly Remarks:
----------------
Make the barrel just like for the 22NSS-5-C.
JB Weld the barrel in just like for the 22NSS-5-C.
For the Frame you will need 6ea 5x20-25mm bolts or what ever you find that works for you.
For the Trigger Shims 3-6ea 5mm washers.
For the Barrel Block you will need 4ea 4x20-25mm bolts or what ever you find that works for you.
The spring has to be 70mm long or longer and must compress a minimum of 30mm and can be anything from 10mm to 13.5mm on its OD.
All the holes are undersized and must be drilled and tapped for what ever hardware you are using.
The hole in the Trigger Sear should be big enough to not drag on the bolt used.
You will need to shim the Trigger 0.5mm on each side to match the Frame-Center and not pinch the Trigger or Trigger Sear.
Use the Slug Cut Template in place of the slide on this gun as the slide doesn't come to the full length of the slug like in the 22NSS-5-C.
Side Note:
----------------
The Print Settings Guide has a list of required Tools & Materials on page 11"
"Release date:
----------------
23Aug2021
BCAM-WS-22EZ-1-A
----------------
Black Cat Aircraft & Manufacturing
-
Weapon Systems
-
22 EZ
-
model 1
-
version A
Print settings:
----------------
Everything is in the print settings guide
Printing Remarks:
----------------
Assembly Remarks:
----------------
Make the barrel just like for the 22NSS-5-C.
JB Weld the barrel in just like for the 22NSS-5-C.
For the Frame you will need 6ea 5x20-25mm bolts or what ever you find that works for you.
For the Trigger Shims 3-6ea 5mm washers.
For the Barrel Block you will need 4ea 4x20-25mm bolts or what ever you find that works for you.
The spring has to be 70mm long or longer and must compress a minimum of 30mm and can be anything from 10mm to 13.5mm on its OD.
All the holes are undersized and must be drilled and tapped for what ever hardware you are using.
The hole in the Trigger Sear should be big enough to not drag on the bolt used.
You will need to shim the Trigger 0.5mm on each side to match the Frame-Center and not pinch the Trigger or Trigger Sear.
Use the Slug Cut Template in place of the slide on this gun as the slide doesn't come to the full length of the slug like in the 22NSS-5-C.
Side Note:
----------------
The Print Settings Guide has a list of required Tools & Materials on page 11"