View this release
Alternative links
Raven AKM Grip: FFFTech/FFFTechnology
An AKM grip with a shallow rounded backstrap and frontal section.
A fairly wide grip, swells from 24.2mm, (Excluding grip top reinforcement) to 30.1mm towards the bottom. From front to back,
the longest point is roughly 52mm.
The top section's reinforcement is based off the AK12 and AK15 grip.
Comes in two variants:
*Standard
*Ridged
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4+
Infill: 25%+
Infill Pattern: Gyroid
Material Flow: 100%
Print the grip upside down
Hardware Needed:
1x OEM AK Grip Screw
LBRY Tags: 3d printing; ak; akm; firearms; grip
An AKM grip with a shallow rounded backstrap and frontal section.
A fairly wide grip, swells from 24.2mm, (Excluding grip top reinforcement) to 30.1mm towards the bottom. From front to back,
the longest point is roughly 52mm.
The top section's reinforcement is based off the AK12 and AK15 grip.
Comes in two variants:
*Standard
*Ridged
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4+
Infill: 25%+
Infill Pattern: Gyroid
Material Flow: 100%
Print the grip upside down
Hardware Needed:
1x OEM AK Grip Screw
LBRY Tags: 3d printing; ak; akm; firearms; grip