View this release
Alternative links
Slipstream Grip (CZ Scorpion Evo 3): FFFTech/FFFTechnology
A swept back, rounded butt grip with a ridged texture that wraps around it's front portion. Inner to
outer wall thickness is 4mm, with a reinforcing rib down the inside frontal section for increased
strength.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 54C
First Layer Print Height: .18mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4 - 5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%
Print the grip upside-down.
Hardware Required:
1x M4x30mm Bolt (Can be ground down to 28mm so it doesn't stick out the side)
1x M4 Hex Nut
LBRY Tags: 3d printing; firearms; grip; scorpion; cz
A swept back, rounded butt grip with a ridged texture that wraps around it's front portion. Inner to
outer wall thickness is 4mm, with a reinforcing rib down the inside frontal section for increased
strength.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 54C
First Layer Print Height: .18mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4 - 5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%
Print the grip upside-down.
Hardware Required:
1x M4x30mm Bolt (Can be ground down to 28mm so it doesn't stick out the side)
1x M4 Hex Nut
LBRY Tags: 3d printing; firearms; grip; scorpion; cz