View this release
Alternative links
Warning - Please Read! - Its recently come to my attention that the OEM and other frames for the P365s have metal inserts to hold the rail module in place and to take the impact of the slide. The frame designs posted here do not accomidate that metal insert and will degrade after about 500 rounds if the frame is made from PLA or PLA+. At this time no other material has been tested but this will get updated if that changes.
TLDR: This is the v1 of the P365XM (Xtra Medium) that is a kit bash of a P365 XL and X Macro frame. This allows you to get the larger grip and full length that the X Macro offers but is shortened so you can use XL mags. Its almost identical to the v0 accept these have some textures inbeded into the grip. I recommend printing rails down, 100% infil.
I've spent some time playing around with textures and these two so far are the better ones I've come up with. The Gritty frame has a really grippy texture inspired by @philphisher:0 's Gritty G43X lower I tried and really liked. The Coral one is actually an accident that I ended up liking so I included it, I though it looked kinda like coral. Also there is a blank frame so you can add your own if you want. It's slightly different than the v0 and still requires a bit of hammering to get the trigger and rail module in place. The tight fit helps a lot. I highly recommend drilling out the pin hole before you put the pin in. I'm going to go add texture to some other things.
LBRY Tags: p365; foscad; 3d printing; sig
TLDR: This is the v1 of the P365XM (Xtra Medium) that is a kit bash of a P365 XL and X Macro frame. This allows you to get the larger grip and full length that the X Macro offers but is shortened so you can use XL mags. Its almost identical to the v0 accept these have some textures inbeded into the grip. I recommend printing rails down, 100% infil.
I've spent some time playing around with textures and these two so far are the better ones I've come up with. The Gritty frame has a really grippy texture inspired by @philphisher:0 's Gritty G43X lower I tried and really liked. The Coral one is actually an accident that I ended up liking so I included it, I though it looked kinda like coral. Also there is a blank frame so you can add your own if you want. It's slightly different than the v0 and still requires a bit of hammering to get the trigger and rail module in place. The tight fit helps a lot. I highly recommend drilling out the pin hole before you put the pin in. I'm going to go add texture to some other things.
LBRY Tags: p365; foscad; 3d printing; sig