
View this release
Alternative links
"Mountain Scout" Fixed Carbine Buttstock: FFFTech/FFFTechnology
A lightweight, Club Foot styled fixed buttstock; slightly longer than the 3FTech Asphalt Escort Buttstock. Designed to withstand blunt
impacts, such as when hiking mountainous terrain.
Has a single 34mm long, vertical sling loop.
Comes with two buttpads:
* Standard, 8mm thick
* Extended, 18mm thick
This buttstock is designed for Milspec Carbine Buffer Tubes only.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 225C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .2mm
Wall Perimeters: 5+
Infill: 20%+
Infill Pattern: Gyroid
Material Flow: 100%
NO support material is needed.
Hardware Needed:
1x M8x10 Hex Socketed Set Screw
2x M4x12 Screws
Accreditations:
theOtherSig: Printed and assembled the buttstock; and provided images of the design attached to his custom build AR-15.
LBRY Tags: 3d printing; ar15; buttstock; carbine; firearms
A lightweight, Club Foot styled fixed buttstock; slightly longer than the 3FTech Asphalt Escort Buttstock. Designed to withstand blunt
impacts, such as when hiking mountainous terrain.
Has a single 34mm long, vertical sling loop.
Comes with two buttpads:
* Standard, 8mm thick
* Extended, 18mm thick
This buttstock is designed for Milspec Carbine Buffer Tubes only.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 225C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .2mm
Wall Perimeters: 5+
Infill: 20%+
Infill Pattern: Gyroid
Material Flow: 100%
NO support material is needed.
Hardware Needed:
1x M8x10 Hex Socketed Set Screw
2x M4x12 Screws
Accreditations:
theOtherSig: Printed and assembled the buttstock; and provided images of the design attached to his custom build AR-15.
LBRY Tags: 3d printing; ar15; buttstock; carbine; firearms