View this release
Alternative links
Simple, fixed Iron Sights.
Requires an M4x25 socket head bolt and M4 nut per sight. Fitment to rail will be tight.
Print as pictured in the folder. Recommend 5 minimum walls - this ensures that the picatinny rail interface is as solid as possible. Be sure all support material is clear of the bolt and nut holes. Thread your bolt partially into the nut to press it into the side of the sight as deep as possible.
Rear sight aperture height over bore is about an inch at its center. Perfect for PDW's and other platforms where the stock isn't as in line with the top of the receiver rail like an AR. Will likely be too low on an AR platform.
LBRY Tags: 3d2a; 3dprinting; 3dprinted; pdw
Requires an M4x25 socket head bolt and M4 nut per sight. Fitment to rail will be tight.
Print as pictured in the folder. Recommend 5 minimum walls - this ensures that the picatinny rail interface is as solid as possible. Be sure all support material is clear of the bolt and nut holes. Thread your bolt partially into the nut to press it into the side of the sight as deep as possible.
Rear sight aperture height over bore is about an inch at its center. Perfect for PDW's and other platforms where the stock isn't as in line with the top of the receiver rail like an AR. Will likely be too low on an AR platform.
LBRY Tags: 3d2a; 3dprinting; 3dprinted; pdw