21
4
View this release
Alternative links
This a .357 Quiver, made specifically for the WOOX Bravado Stock for Henry Lever Action Rifles.
This is not an MLOK accessory. This replaces the metal MLOK section that comes on the Bravado Stock. The Rounds come out at a 30 degree angle for easier removal for loading.
YOU WILL HAVE TO 'SPLIT TO OBJECTS' IN THE SLICER.
The Design isn't perfect. The shells sit inconsistently tight, but they aren't too bad. You can run some sandpaper on the inside of the tight ones.
It is a two-piece design. The 2 screws that hold the MLOK section are reused here, place the two screw in the proper holes of the "Base" Section, line up he quiver portion onto it, and flip upside down. Then mount 2 M4x6 (you can use M4x8 with washers) screws in the holes to secure, then tighten the entire assembly onto the stock with the holes in the center of each end of the round quiver.
I will revisit this another time for a better, simpler design. Please let me know what you think and how I can improve this!
Adit: Already updated the quiver a little, the ends should be a little stronger now.[
LBRY Tags: henry; lever action; woox; bravado; quiver
This is not an MLOK accessory. This replaces the metal MLOK section that comes on the Bravado Stock. The Rounds come out at a 30 degree angle for easier removal for loading.
YOU WILL HAVE TO 'SPLIT TO OBJECTS' IN THE SLICER.
The Design isn't perfect. The shells sit inconsistently tight, but they aren't too bad. You can run some sandpaper on the inside of the tight ones.
It is a two-piece design. The 2 screws that hold the MLOK section are reused here, place the two screw in the proper holes of the "Base" Section, line up he quiver portion onto it, and flip upside down. Then mount 2 M4x6 (you can use M4x8 with washers) screws in the holes to secure, then tighten the entire assembly onto the stock with the holes in the center of each end of the round quiver.
I will revisit this another time for a better, simpler design. Please let me know what you think and how I can improve this!
Adit: Already updated the quiver a little, the ends should be a little stronger now.[
LBRY Tags: henry; lever action; woox; bravado; quiver
Related to This Release
190
5
Decker 380 Full Length Rail
What can I say? I love guns and I love rails. I like my rails long AF too. Luckily, I also like to share my rails.
So if you want a rail, you can hav…
31
2
Basic JMAC Style Cheek Riser
Basic cheek riser of various heights that fits a JMAC, 5KU or Atlas Custom Works AB-8R style stock. 50mm M4 hole spacing. Tested on an Atlas Custom…
108
4
M79 STOCK Dysfunction v2 (updated)
I TRY make m79 stock for Dysfunction,
https://odysee.com/@GG3D:2/Projectile-Dysfunction:2
LBRY Tags: 3d2a; guncad; m79; stock
298
3
Chinese sks stock 3d printed
Stock designed around a 70s sks and made for 3d printing. Uses an ar buffer tube and stock with the forend and reciever fitting together and having a…
484
16
Henry Big Boy X Stock
Henry Big Boy X Stock
LBRY Tags: henry; fosscad; big boy; lever; stock
Twitter
Matrix
Source
