793
14
View this release
Alternative links
Übertechnik Grip (AR-15): FFFTech/FFFTechnology
A grip that utilizes the palm pad on the Balance Mini Grip, but has been relocated to the front section, and has
been split into two separate pads. Has rounded backstrap with a straight front section.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4-5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18% (Use tree supports; only needed for the top/rear of the grip.)
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
LBRY Tags: 3d printing; firearms; guns; ar15; grip
A grip that utilizes the palm pad on the Balance Mini Grip, but has been relocated to the front section, and has
been split into two separate pads. Has rounded backstrap with a straight front section.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4-5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18% (Use tree supports; only needed for the top/rear of the grip.)
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
LBRY Tags: 3d printing; firearms; guns; ar15; grip
Related to This Release
1308
16
Balance Mini Grip
A basic slim and compact grip for the AR-15. (And other compatible firearms) The design was created to have a grip angle of 20°; between A2's 25° and…
73
21A Mycelium Panels V1.1
Mycelium Beretta 21A Bobcat Grip Panels V1.1: Laffs Dynamics
Update V1.1: Added Trigger Cut Relieved Panel Set.
Printer Used: Ender 3 V2
Filame…
441
9
VertiGrip (AR-15)
VertiGrip (AR-15): FFFTech/FFFTechnology
A 0° angled grip designed typically for precision rifles. Has a rear palm swell for comfort,
and has an ov…
1104
28
"Alley Scout" Carbine Buttstock
"Alley Scout" Carbine Buttstock: Laffs Dynamics
This buttstock is designed for Milspec Carbine Buffer Tubes only.
Printer Used: Ender 3 V2
Fila…
1218
16
Spooky Scary Grip (AR-15)
Spooky Scary Grip (AR-15): Laffs Dynamics
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Pri…
Twitter
Matrix
Source
